Yaskawa i80M Appendix - Manual (Page 229)

Parameter No. N A M E
TPDSPW TM06 SETUP
(Bit No. 7 6 5 4 3 2 1 o )
O : Subtool word display is ineffective.
1 : Subtool word display is effective.
O : Word display of tool pot invalid.
1: Word display of tool pot valid.
O : Intermediate pot display on ATC screen is ineffective.
1 : Intermediate pot display on ATC screen is effective.
O : If T command and M06 command are in the same
block, T command takes precedence.
1: If T command and M06 command are in the same
block, M06 command takes precedence.
O : Setup menu screen is effective.
. screen is ineffective.
O : External timer display invalid.
0 . ‘TM ‘ Sp External timer display valid.
Parameter No. N A M E
SRCH2 SRCH 1 MDIRST
(Bit No. 7 6 5 4 3 2 1 o )
O : Operation process address search is made by binary.
1: Operation process address search is made by character.
O : Editing process address search is made by binary.
1: Editing process address search is made by character.
O : Offset display input is fixed to absolute input.
0 .
. offse
t
f
to incremental
O : Work shift display input is fixed to absolute input.
0 .
. fixed to incremental input.
O : Work display is switched by soft keys.
: Work shift/offset display is switched
O : MDI operation starts from current cursor position.
0 . . MDI operation starts from beginning of MDI program.
O : Panel reset and external reset clears MDI buffer.
MDI buffer.
O : If M02 or M30 is specified, MDI buffer is cleared when
operation is completed.
1: If M02 or M30 is specified, MDI buffer is not cleared
when operation is completed.
– 2 2 9 –