Yaskawa i80M Appendix - Manual (Page 309)

Parameter No. N A M E
#6840
#6841
I
#6844
#6847
Length direction reference value Xo in offset presetter
measurement.
Setting : 1 =O.OOlmm or O. 0001 in.
Setting range : 0 to 999999999
Radius direction reference value Zo in offset presetter
measurement.
Setting : 1 = 0.001 mm or 0.0001 in.
Setting range : 0 to
I
Probe radius for work presetter measurement.
Setting : 1 = 0.001 mm or 0.0001 in.
Setting range : 0 to *999999999
Work setter measurement possible retraction amount.
Setting : 1 = 0.001 mm or in.
Setting range : 0 to
Work setter measurement separation amount.
Setting : 1 = 0.001 mm or 0.0001 in.
Setting range : 0 to
– 3 0 9 –