SMA SI 3.0-11 Installation - Manual (Page 11)

SMA Solar Technology AG 2 Safety
Installation Manual SI30M-44M-60H-80H-IA-en-30 11
2.3 Information for Handling Batteries
&$87,21
Risk of burns due to hot components
Some components on the Sunny Island inverter may heat up significantly during operation. Touching these components
can cause burns.
• Touch only the enclosure lid of the Sunny Island inverter during operation.
• When the Sunny Island is open, do not touch hot surfaces.
/05*$&
Destruction of the Sunny Island inverter due to electrostatic discharge (ESD)
Touching the electronic components within the Sunny Island inverter can lead to damage to or destruction of the
Sunny Island.
• Do not touch any electronic assemblies.
• Ground yourself before touching any connections.
:$51,1*
Danger to life due to explosive gases
Explosive gases may escape from the battery and cause an explosion. This can result in death or serious injury.
• Protect the battery environment from open flames, embers, or sparks.
• Install, operate, and maintain the battery in accordance with the manufacturer's specifications.
• Do not heat the battery above the temperature permitted or burn the battery.
• Ensure that the battery room is sufficiently ventilated.
Chemical burns and poisoning due to battery electrolyte
If handled inappropriately, battery electrolyte can cause irritation to the eyes, respiratory system, and skin and it can
be toxic. This may result in blindness and serious chemical burns.
• Protect the battery enclosure against destruction.
• Do not open or deform the battery.
• Whenever working on the battery, wear suitable personal protective equipment such as rubber gloves, apron,
rubber boots, and goggles.
• Rinse acid splashes thoroughly with clear water and consult a doctor.
• Install, operate, maintain, and dispose of the battery according to the manufacturer's specifications.
Risk of injury due to short-circuit currents
Short-circuit currents in the battery can cause heat build-up and electric arcs. Burns or eye injuries due to flashes may
result.
• Remove watches, rings, and other metal objects.
• Use insulated tools.
• Do not place tools or metal parts on the battery.