SMA SI 3.0-11 Installation - Manual (Page 101)

SMA Solar Technology AG 11 Accessories
Installation Manual SI30M-44M-60H-80H-IA-en-30 101
11 Accessories
The following overview details the accessories and spare parts for your product. These can be ordered as required from
SMA Solar Technology AG or your distributor.
Designation Short description SMA order number
Batfuse-B.01 (80 A, 100 A,
160 A, 200 A, 250 A)
2-pole LV/HRC battery fuse-switch-disconnector, size 1 for
1 Sunny Island, 3 DC inputs (1 x battery and 2 x
Sunny Island Charger 50), 1 x auxiliary voltage output
8 A
BATFUSE-B.01*
* When ordering, additional details on the intended use are required.
Batfuse-B.03 (80 A, 100 A,
160 A, 200 A, 250 A)
2-pole LV/HRC battery fuse-switch-disconnector, size 1 for
up to three Sunny Island units, 6 DC inputs (2 x battery
and 4 x Sunny Island Charger 50), 1 x auxiliary voltage
output 8 A
BATFUSE-B.03*
Load-shedding contactor 3-pole load-shedding contactor with 48 V DC coil for
Sunny Island
SI-LS100-48
SI-Shunt Battery current sensor
The battery current sensor is available in different versions.
You can obtain more information from your distributor or
SMA Solar Technology AG.
SI-SHUNTXXX*
Sunny Island Charger 50 PV charge controller for off-grid systems SIC50-MPT
SI-COMSMA.BGx RS485 communication interface SI-COMSMA-NR
SI-SYSCAN.BGx Communication interface for communication between
clusters in a multicluster system
SI-SYSCAN-NR
SWDMSI Sunny Island Speedwire data module SWDMSI