HEIDENHAIN PROFIBUS-DP (DPV2) - Manual (Page 84)

Functionality in the PROFIBUS DPV2 device
84
8.14.3 Parameters 6500 and 65002 -Preset value
The parameter 65000 and 65002 sets the value for the preset
function. The parameter 65002 should be used if the preset value
exceeds 32 bits. For more information regarding the Preset
function control, see chapter 8.7.
PNU 65000
Significance Preset value
Data type Integer32
Access Read and write
Validity range Profile specific
Explanation The preset value sets the value for the preset function. The
preset value can be stored in the non-volatile memory by
PROFIdrive parameter 971 and will be reloaded at each
start up if stored.
Table 49 Structure of parameter 65000 Preset value
PNU 65002
Significance Preset value 64 bit
Data type Integer64
Access Read and write
Validity range Profile specific
Explanation The preset value sets the value for the preset function. The
preset value can be stored in the non-volatile memory by
PROFIdrive parameter 971 and will be reloaded at each
start up if stored.
Table 50 Structure of 65002 Preset value 64 bit