HEIDENHAIN PROFIBUS-DP (DPV2) - Manual (Page 59)

Acyclic parameter data
59
7.4.10 Parameter 980, read only
This parameter shows the supported parameters
980 unsigned int
980[0] = 918 980[8] = 979 980[16] = 65002
980[1] = 922 980[9] = 61000 980[17] = 65003
980[2] = 925 980[10] = 61001
980[3] = 964 980[11] = 61002
980[4] = 965 980[12] = 61003
980[5] = 971 980[13] = 60004
980[6] = 974 980[14] = 65000
980[7] = 975 980[15] = 65001
7.4.11 Parameter 65000 read/write
Used with telegram 81-83
65000 signed long, preset value 32 bit.
7.4.12 Parameter 65001, read only
Used with telegram 81-84
65001 unsigned long
65001[0] = 0x000 C 0101  Header, Version of parameter structure and numbers of
indexdescribing the encoder. 12 index and version 1.01
65001[1] = Operating status (Bit 4 alarm channel control is always set with profile
version 4.x)
65001[2] = Alarm
65001[3] = Supported alarms
65001[4] = Warning
65001[5] = Warnings supported
65001[6] = 0x00000401
 Encoder profile version. Always set to this value.
65001[7] = Operating time
65001[8] = Offset value
65001[9] = Singleturn value, Scaled value
65001[10] = Total measuring length, scaled value (Linear = 1)
65001[11] = Velocity measuring unit, see chapter 8.10.