Feature content level (upgrade functions), Tnc model, sof tw a re and f eat ur es – HEIDENHAIN iTNC 530 (340 49x-05) User Manual
Page 9
HEIDENHAIN iTNC 530
9
TNC Model, Sof
tw
a
re
and F
eat
ur
es
Feature content level (upgrade functions)
Along with software options, significant further improvements of the
TNC software are managed via the Feature Content Level (FCL)
upgrade functions. Functions subject to the FCL are not available
simply by updating the software on your TNC.
Upgrade functions are identified in the manual with FCL n, where n
indicates the sequential number of the feature content level.
You can purchase a code number in order to permanently enable the
FCL functions. For more information, contact your machine tool
builder or HEIDENHAIN.
All upgrade functions are available to you without surcharge
when you receive a new machine.
FCL 4 functions
Description
Graphical depiction of the protected
space when DCM collision monitoring is
active
Page 370
Handwheel superimposition in stopped
condition when DCM collision
monitoring is active
3-D basic rotation (set-up compensation)
Machine Manual
FCL 3 functions
Description
Touch probe cycle for 3-D probing
User’s Manual for Cycles
Touch probe cycles for automatic datum
setting using the center of a slot/ridge
User’s Manual for Cycles
Feed-rate reduction for the machining of
contour pockets with the tool being in full
contact with the workpiece
User’s Manual for Cycles
PLANE function: Entry of axis angle
User documentation as a context-
sensitive help system
smarT.NC: Programming of smarT.NC
and machining can be carried out
simultaneously
smarT.NC: Contour pocket on point
pattern
smarT.NC Pilot
smarT.NC: Preview of contour programs
in the file manager
smarT.NC Pilot
smarT.NC: Positioning strategy for
machining point patterns
smarT.NC Pilot