HEIDENHAIN iTNC 530 (340 49x-05) - Manual (Page 627)

HEIDENHAIN iTNC 530 627
1
8
.1 Gener
a
l User P
a
ra
met
e
rs
Configure tool tables MP7260
Inactive: 0
Number of tools generated by the TNC when a new tool table is opened:
1 to 254
If you require more than 254 tools, you can expand the tool table with the function APPEND N
LINES (see “Tool Data,” page 160)
Configure pocket
tables MP7261.0 (magazine 1)
MP7261.1 (magazine 2)
MP7261.2 (magazine 3)
MP7261.3 (magazine 4)
MP7261.4 (magazine 5)
MP7261.5 (magazine 6)
MP7261.6 (magazine 7)
MP7261.7 (magazine 8)
Inactive: 0
Number of pockets in the tool magazine: 1 to 9999
If the value 0 is entered in MP7261.1 through MP7261.7, the TNC uses only one tool magazine.
Index tool numbers in
order to be able to
assign different
compensation data to
each tool number MP7262
Do not index: 0
Number of permissible indices: 1 to 9
Configuration of tool
table and pocket table MP7263
Configuration settings for tool table and pocket table: %0000
„ Show the POCKET TABLE soft key in the tool table: Bit 0 = 0
„ Do not show the POCKET TABLE soft key in the tool table: Bit 0 = 1
„ External data transmission: Only transmit displayed columns: Bit 1 = 0
„ External data transmission: Transmit all columns: Bit 1 = 1
„ Show the EDIT ON/OFF soft key in the pocket table: Bit 2 = 0
„ Do not show the EDIT ON/OFF soft key in the pocket table: Bit 2 = 1
„ RESET COLUMN T and RESET POCKET TABLE soft keys active: Bit 3 = 0
„ RESET COLUMN T and RESET POCKET TABLE soft keys not active: Bit 3 = 1
TNC displays, TNC editor