HEIDENHAIN iTNC 530 (340 49x-05) - Manual (Page 385)

HEIDENHAIN iTNC 530 385
1
1
.4 Global Pr
ogr
a
m Set
tings (Sof
tw
ar
e Option)
Basic rotation
The basic rotation function enables you to compensate a workpiece
misalignment. The effect corresponds to the basic rotation function
that you can define in the manual mode with the probing functions.
The TNC synchronizes the values entered in the basic rotation menu
or the ROT column of the preset table with the fillable form.
You can change the basic rotation values in the form, but the TNC
does not write them back into the basic rotation menu or the preset
table.
If you press the SET STANDARD VALUES soft key, the TNC restores
the basic rotation assigned to the active preset.
Remember that you may have to return to the contour after
activation of this function. The TNC then automatically calls
the return-to-contour menu after the form is closed (see
“Returning to the contour” on page 575).