HEIDENHAIN iTNC 530 (340 49x-05) - Manual (Page 596)

596 MOD Functions
1
7.6 Ether
n
et Int
e
rf
ace
U Press the Configuration button to open the Configuration menu:
Setting Meaning
Status „ Interface active
Connection status of the selected Ethernet
interface
„ Name
Name of the interface you are currently
configuring
„ Plug connection
Number of the plug connection of this
interface on the logic unit of the control
Profile Here you can create or select a profile in which
all settings shown in this window are stored.
HEIDENHAIN provides two standard profiles:
„ LAN-DHCP
Settings for the standard TNC Ethernet
interface, should work in a standard company
network
„ MachineNet
Settings for the second, optional Ethernet
interface; for configuration of the machine
network
Press the corresponding buttons to save, load
and delete profiles.
IP address „ Automatically procure IP address option:
The TNC is to procure the IP address from the
DHCP server.
„ Set the IP address manually option:
Manually define the IP address and subnet
mask. Input: Four numerical values separated
by points, in each field, e.g. 160.1.180.20 and
255.255.0.0