Programming: special functions – HEIDENHAIN iTNC 530 (340 49x-05) User Manual
Page 39
HEIDENHAIN iTNC 530
39
12.1 Functions for Multiple Axis Machining ..... 426
12.2 The PLANE Function: Tilting the Working Plane (Software Option 1) ..... 427
Define the PLANE function ..... 429
Reset the PLANE function ..... 430
Defining the machining plane with space angles: PLANE SPATIAL ..... 431
Defining the machining plane with projection angles: PROJECTED PLANE ..... 433
Defining the machining plane with Euler angles: EULER PLANE ..... 435
Defining the machining plane with two vectors: VECTOR PLANE ..... 437
Defining the machining plane via three points: POINTS PLANE ..... 439
Defining the machining plane with a single, incremental space angle: PLANE RELATIVE ..... 441
Tilting the working plane through axis angle: PLANE AXIAL (FCL 3 function) ..... 442
Specifying the positioning behavior of the PLANE function ..... 444
12.3 Inclined-Tool Machining in the Tilted Plane ..... 448
Inclined-tool machining via incremental traverse of a rotary axis ..... 448
Inclined-tool machining via normal vectors ..... 449
12.4 TCPM FUNCTION (Software Option 2) ..... 450
Define TCPM FUNCTION ..... 451
Mode of action of the programmed feed rate ..... 451
Interpretation of the programmed rotary axis coordinates ..... 452
Type of interpolation between the starting and end position ..... 453
12.5 Miscellaneous Functions for Rotary Axes ..... 455
Feed rate in mm/min on rotary axes A, B, C: M116 (software option 1) ..... 455
Shorter-path traverse of rotary axes: M126 ..... 456
Reducing display of a rotary axis to a value less than 360°: M94 ..... 457
Exact stop at corners with nontangential transitions: M134 ..... 462