HEIDENHAIN iTNC 530 (340 49x-05) - Manual (Page 595)

HEIDENHAIN iTNC 530 595
1
7.6 Ether
n
et Int
e
rf
ace
General network settings
U Press the DEFINE NET soft key to enter the general network
settings. The Computer name tab is active:
U Select the Interfaces tab to enter the interface settings:
Setting Meaning
Primary
interface Name of the Ethernet interface to be
integrated in your company network. Only
active if a second, optional Ethernet interface
is available on the control hardware.
Computer name Name displayed for the TNC in your company
network.
Host file Only required for special applications:
Name of a file in which the assignments of
IP addresses to computer names is defined.
Setting Meaning
Interface list List of the active Ethernet interfaces. Select
one of the listed interfaces (via mouse or arrow
keys).
„ Activate button:
Activate the selected interface (an X appears
in the Active column)
„ Deactivate button:
Deactivate the selected interface
(a hyphen (-) appears in the Active column)
„ Configuration button:
Open the Configuration menu
IP forwarding This function must be kept deactivated.
Only activate this function if external access via
the second, optional Ethernet interface of the
TNC is necessary for diagnostic purposes. Only
do so after instruction by our Service
department.