HEIDENHAIN iTNC 530 (340 49x-03) Pilot - Manual (Page 92)

92
Coo
rdin
a
te
Transfor
mat
ion
Cycles
MIRROR IMAGE (Cycle 8)
8 CYCL DEF: Select Cycle 8 MIRROR IMAGE
8 Enter the mirrored axis: X or Y or X and Y
To reset the mirror image, re-enter the cycle definition with NO ENT.
15 CALL LBL1
16 CYCL DEF 7.0 NULLPUNKT
17 CYCL DEF 7.1 X+60
18 CYCL DEF 7.2 Y+40
19 CYCL DEF 8.0 SPIEGELN
20 CYCL DEF 8.1 Y
21 CALL LBL1
„ The tool axis cannot be mirrored.
„
The cycle always mirrors the original contour (in this
example in subprogram LBL1).
Y
X
Z