Space angle definition (plane spatial) – HEIDENHAIN iTNC 530 (340 49x-03) Pilot User Manual
Page 102
102
The PLANE Fun
c
tion
(softw
ar
e
o
pt
io
n
1
)
Space Angle Definition (PLANE SPATIAL)
8
Press SPECIAL TNC FUNCTIONS.
8
Press TILT MACHINING PLANE, and then PLANE SPATIAL
8
Spatial angle A?:
Rotational angle SPA around the fixed machine
axis X (see figure at top right).
8
Space angle B?:
Rotational angle SPB around the fixed machine axis
Y (see figure at top right).
8
Space angle C?:
Rotational angle SPC around the fixed machine axis
Z (see figure at lower right).
8
Continue with the positioning properties (see “Automatic Positioning
(MOVE/STAY/TURN)” on page 110).
5 PLANE SPATIAL SPA+27 SPB+0 SPC+45 MOVE SETUP10 F500 SEQ-
Before programming, note the following:
You must always define the three space angles SPA, SPB,
and SPC, even if one of them = 0.
The sequence of the rotations described above is
independent of the active tool axis.