HEIDENHAIN iTNC 530 (340 49x-03) Pilot - Manual (Page 3)

3
The Pilo
t
The Pilot
... is your concise programming guide for the HEIDENHAIN
iTNC 530 contouring control. For more comprehensive
information on programming and operating, refer to the TNC
User’s Manual. There you will find complete information on:
„ Q-parameter programming
„
The central tool file
„ 3-D tool compensation
„ Tool measurement
Symbols in the Pilot
Certain symbols are used in the Pilot to denote specific types of
information:
Control NC software number
iTNC 530 340 490-03
iTNC 530, export version 340 491-03
iTNC 530 with Windows 2000 340 492-03
iTNC 530 with Windows 2000,
export version 340 493-03
iTNC 530 programming station 340 494-03
Important note
Warning: danger for the user or machine!
The TNC and the machine tool must be prepared by
the machine tool builder to perform this function.
Chapter in the User's Manual where you will find
more detailed information on the current topic.