HEIDENHAIN iTNC 530 (340 49x-03) Pilot - Manual (Page 109)

109
The PLANE Fun
c
tion
(softw
ar
e
o
pt
io
n
1
)
Resetting the Plane Definition (PLANE RESET)
8 Press SPECIAL TNC FUNCTIONS.
8 Press TILT MACHINING PLANE, and then PLANE RESET.
8 Continue with the positioning properties (see “Automatic Positioning
(MOVE/STAY/TURN)” on page 110).
5 PLANE RESET MOVE SETUP10 F500 SEQ-
Before programming, note the following:
The PLANE RESET function resets the current PLANE
function—or an active Cycle 19—completely (angles = 0 and
function is inactive). It does not need to be defined more than
once.