HEIDENHAIN iTNC 530 (340 49x-03) Pilot - Manual (Page 124)

124
Miscellan
e
ous Fun
c
tion
s M
Miscellaneous Functions M
M93 Reserved.
M94 Reduce display of rotary axis to value under 360°
M95 Reserved.
M96 Reserved.
M97 Machine small contour steps
M98 Suspend tool path compensation
M99 Cycle call, non-modal
M101 Automatic tool change after tool lifetime expires
M102 Reset M101
M103 Reduce plunging feed rate to factor F
M104 Reactivate the datum as last defined
M105 Machining with second k
v
factor
M106 Machining with first k
v
factor
M107 See User’s Manual
M108 Reset M107
M109 Constant contouring speed of tool cutting edge
on arcs (increase and decrease feed rate)
M00 Stop program run/Spindle stop/Coolant off
M01 Optional Program-Run Interruption
M02 Stop program run/Stop spindle/Coolant off/Jump
back to block1/Clear status display
M03 Spindle ON clockwise
M04 Spindle ON counterclockwise
M05 Spindle stop
M06 Tool change/Stop program run (depending on
MPs)/Spindle stop
M08 Coolant ON
M09 Coolant OFF
M13 Spindle ON clockwise/Coolant ON
M14 Spindle ON counterclockwise/Coolant ON
M30 Same function as M02
M89 Vacant miscellaneous function or cycle call,
modally effective (depending on MPs)
M90 Constant contouring speed at corners (effective
only in lag mode)
M91 Within the positioning block: Coordinates are
referenced to machine datum
M92 Within the positioning block: Coordinates are
referenced to position defined by the machine
manufacturer