HEIDENHAIN iTNC 530 (340 49x-03) Pilot - Manual (Page 17)

17
Co
nto
u
r Ap
proa
ch a
n
d
D
e
pa
rture
Path Functions for Approach and Departure
8 Press the soft key with the desired path function:
Straight line with tangential
connection
Straight line perpendicular to a contour
point
Circular arc with tangential connection
Straight line segment tangentially
connected to the contour through an
arc
„ Program a radius compensation in the APPR block.
„ DEP blocks set the radius compensation to R0!