HEIDENHAIN iTNC 530 (340 49x-03) Pilot - Manual (Page 13)

13
Fu
nd
ame
n
ta
ls
Calling tool data
8 Tool number or name
8 Working spindle axis X/Y/Z: Tool axis
8 Spindle speed S
8 Feed rate F
8 Tool length oversize DL (e.g. to compensate wear)
8 Tool radius oversize DR (e.g. to compensate wear)
8 Tool radius oversize DR2 (e.g. to compensate wear)
Tool change
3 TOOL DEF 6 L+7.5 R+3
4 TOOL CALL 6 Z S2000 F650 DL+1 DR+0.5 DR2+0.1
5 L Z+100 R0 FMAX
6 L X-10 Y-10 RO FMAX M6
„ Beware of tool collision when moving to the tool change
position!
„
The direction of spindle rotation is defined by M function:
„ M3: Clockwise
„ M4: Counterclockwise
„ The maximum permissible oversize for tool radius or
length is ± 99.999 mm!
DR<0
DR>0
DL<0
R
DL>0
L
R