HEIDENHAIN iTNC 530 (340 49x-03) Pilot - Manual (Page 107)

107
The PLANE Fun
c
tion
(softw
ar
e
o
pt
io
n
1
)
Incremental Space Angle (PLANE RELATIVE)
8 Press SPECIAL TNC FUNCTIONS.
8 Press TILT MACHINING PLANE, and then PLANE RELATIVE
8 Incremental angle?: Spatial angle about which the active machining
plane is to be rotated additionally (see figure at right). Use a soft key
to select the axis to be rotated about.
8 Continue with the positioning properties (see “Automatic Positioning
(MOVE/STAY/TURN)” on page 110).
5 PLANE RELATIVE SPB-45 MOVE SETUP10 F500 SEQ-
Before programming, note the following:
The defined angle always applies to the active machining
plane, no matter which function you used to activate it.
You can program any number of PLANE RELATIVE functions in
a row.
If you want to return to the machining plane that was active
before the PLANE RELATIVE function, define the PLANE
RELATIVE
function again with the same angle but with the
opposite algebraic sign.
If you use the PLANE RELATIVE function on an untilted
machining plane, then you simply rotate the untilted plane
about the space angle defined in the PLANE function.