HEIDENHAIN CNC Pilot 4290 - Manual (Page 47)

HEIDENHAIN CNC PILOT 4290 35
3.4.2 Shifting theWorkpiece Datum
Shifting the Workpiece Datum
For more than one slide: Define the desired slide
(with the Slide change key)
<
Position the tool
<
Select ”Setting up - Shift zero point.”
<
The ”Shift zero point” dialog box displays the
current workpiece zero point.
<
Enter the workpiece zero point
Enter a ”zero point shift”
Contact position = tool zero point
Touch the end face with the tool
Accept the tool contact position as
workpiece zero point
Workpiece zero point relative to the contact
position
Touch the end face with the tool
Accept the tool contact position
Enter the measured value (distance
of the tool contact position from the
workpiece zero point)
The tool zero point is managed in the setup
parameters (Select: „Act. Para – Setting up (menu) –
Tool zero point – ..“).
■ The ”displacement” is with respect to
the machine zero point.
■ You can also offset the workpiece zero
point for the X and Y axes.
Soft keys
■ Assigns a handwheel to an axis
■ Defines the handwheel interpolation factor
Switches the machine display
Enter the feed per revolution
Enter the constant surface speed
Enter the M function
Define the Z position as tool zero point (or X or Y
position)
Specify the tool zero point relative to the current Z
position (or X or Y position)
3.4 Setup Functions