HEIDENHAIN CNC Pilot 4290 - Manual (Page 221)

HEIDENHAIN CNC PILOT 4290 209
Soft keys
Depiction as ”solid-body model” in the
standard view (not rotated, not
enlarged/reduced)
Depiction as wire model
Magnify displayed graphics
Reduce displayed graphic
5.7 3-D View
In the 3-D view the CNC PILOT shows the workpiece
in its simulated condition. If you call the 3-D view
from the contour simulation, the finished part is
depicted.
Call: ”3-D view” menu itemh
Exit the 3-D view
Switching the display modes:
■ With a soft key you can switch between a
standard solid model or a ”grating” wire model
■ To magnify: Soft key or ”page up”
■ To reduce: Soft key or ”page down”
■ To rotate: cursor keys, plus and minus key
■ Soft key ”standard 3-D view” displays the
workpiece in the standard size and position
ar
The 3-D view accounts for contours
machined by turning – no C or Y
operations.
5.7 3-D
V
ie
w