HEIDENHAIN CNC Pilot 4290 - Manual (Page 229)

HEIDENHAIN CNC PILOT 4290 217
6.2 Program Management
6.2.1 TURN PLUS Files
TURN PLUS has indexes for:
■ Complete programs (blank and finished part
definition as well as working plan generation)
■ Workpiece descriptions (workpiece blank and
finished part)
■ Workpiece blank descriptions
■ Finished part descriptions
■ Individual contour trains
■ TURN PLUS turret assignments (see ” 6.11.2 Set
UpTool List”)
You can use this structure for your requirements. for
example, for generating different working plans using
the same workpiece definition.
”Program (management)” drop-down menu:
■ Load
Select the drop-down menu (Complete, Blank,
Finished part or Contour train)
Select the file
■ New – creates a new TURN PLUS program.
Enter the program name and define the material
To activate the ”Editing program head” window,
select ”Program head.”
After completing the ”program head editing,”
define the workpiece blank and finished part and
generate the working plan
■ Deleting
Select the drop-down menu (Complete, Blank,
Finished part or Contour train)
Select the file and delete it
■ Saving – saves the created program.
Select the drop-down menu (Complete,
Workpiece, Blank, Finished part or NC program) -
with ”Complete” the NC program will also be
saved.
Enter/check the program name
Press ”OK” – the file is saved
6.2 Pr
ogr
am Manag
ement
Soft keys
Change to the DIN PLUS mode
Change to the simulation operating mode
Activate zoom (see: ” 6.14 Control Graphics”