HEIDENHAIN CNC Pilot 4290 - Manual (Page 426)

10 Transfer 414
1
0.2 T
ransf
er
Method
10.2.2 Configuring for DataTransfer
Configuring a network
Windows networks and FTP networks are configured
in the Windows operating system.
Log-in as ”system manager.”
Select ”Controls – Network – Settings.” This menu
item calls the Windows dialog box ”Network.”
Perform network configuration. The CNC PILOT is
entered as ”Client for Microsoft Networks.” Details
on installing and configuring networks are available
in the documentation or in the on-line help function
of Windows.
HEIDENHAIN recommends configuration
of the Windows networks by the
authorized personnel of your machine
manufacturer.
Settings for Windows network
Log-in as ”system manager”
Select ”Setting – Network” (Transfer mode)
”Setting for network copying” dialog box:
■ Transfer directory: Enter the path of the
communication partner (see next page)
■ Auto-login during power-up:
– YES: The CNC PILOT accepts the login with the
data entered in ”User name” and ”Password”
– NO: You enter the user name and password
during system start
Recommendation: Use the automatic login
Activate Windows network:
Select ”Network” (in Transfer mode) – With the
defined mask, the CNC PILOT displays:
■ Files of its own system
■ Files of the defined transfer directory (Files of the
communication partner)