HEIDENHAIN CNC Pilot 4290 - Manual (Page 277)

HEIDENHAIN CNC PILOT 4290 265
In the starting point automatic configuration parameter you
specify the behavior of TURN PLUS when entering the finished part
contour.
Meaning of the setting in the Starting point automatic field:
■ Yes: Upon calling the finished part contour entry, TURN PLUS
immediately branches to the entry of the contour starting point.
The DXF import soft key is not available.
■ No: After the finished-part contour entry is called, you have the
choice of whether a finished-part contour/DXF contour should be
imported, or whether the contour will be entered manually.
Only the entry of the finished part contour is affected by this
setting. For all other contours you select the form of contour entry
either by menu or by soft key.
6.8 Importing DXF Contours