HEIDENHAIN CNC Pilot 4290 - Manual (Page 294)

6 TURN PLUS 282
TURN PLUS entered the calculated parameters as
proposed values. Check and edit the entries.
The meaning of the transfer program
depends on the name of the expert
program.
Transfer parameters with the expert program
”UMKOMPL”
Spindle speed for workpiece transfer (LA)
Direction of spindle rotation (LB):
■ 0: CCW
■ 1: CW
Speed or angular synchronism (LC):
■ 0: Angular synchronism without angular
offset
■ >0: Angular synchronism with preset
angular offset
■ <0: Spindle speed synchronism
Transfer position in Z (LD):
■ 0: Transfer position in machine dimension 1
■ 1..6: Transfer position in machine
dimension 1..6
■ ≠ 0..6: Transfer position – Calculation of the
proposed value: see sketch
Working position in Z (LE):
Proposed value: Zero point offset e.g. from
machine parameter 1164 for Z axis $1 (see
sketch)
Finished part length (LF): From the workpiece
description
Distance from stop surface (LH): Distance between
reference point of chuck and stop surface of
the clamping jaw, calculated from the second
setup
Minimum traverse (I):
■ Without moving to fixed stop: Safety
clearance on the workpiece to be transferred
– proposed value: From ”safety clearance on
blank” (machining parameter 2)
■ With traverse to a fixed stop: See machine
manual
Maximum traverse (J):
■ No input: Without traverse to fixed stop
■ With input: With traverse to fixed stop –
meaning of the parameters I and J: See
machine manual
1, if 2 workpieces (U): No meaning
6.1
1 Pr
epar
e
Continued