HEIDENHAIN CNC Pilot 4290 - Manual (Page 351)

HEIDENHAIN CNC PILOT 4290 339
7.1 P
a
ra
met
er Mode of Oper
ation
Parameter lists
The parameter groups
■ Setup parameters
■ Machining parameters
■ PLC parameters
are available in the sub-items of ”Param. lists.” You
can select these parameters without being logged on
as system manager.
Editing set-up/machining parameters
Select ”Param. lists” (Parameter mode)
<
Select parameter groups
■ Setup parameters
■ Machining parameters
■ PLC parameter
<
Select parameters
<
ENTER – the CNC PILOT presents the parameters
for editing
<
Make the changes
7.1.2 Editing Parameters
Active Parameters
An overview of frequently used parameters are
presented in the ”Cur.(rent) para(meter)” drop-down
menu so that you can select them without having to
know the parameter number.
Editing parameters
If required, log on as system manager (Service
mode)
<
Select ”Cur. Para” (Parameter mode)
<
Select a parameter via the menu - the CNC PILOT
opens a window for editing the parameter.
<
Make the changes