HEIDENHAIN CNC Pilot 4290 - Manual (Page 299)

HEIDENHAIN CNC PILOT 4290 287
Continue existing working plan
Select ”IWG”
<
TURN PLUS opens the ”work plan exists” dialog
box. Select continue
<
Add further work blocks
Change existing work plan
Select ”IWG”
<
TURN PLUS opens the ”Working plan exists!”
dialog box. Select Change
<
TURN PLUS displays the existing work plan
<
Mark the work blocks to be changed
<
TURN PLUS simulates the work plan
■ Unmarked work blocks: Without stop
■ Marked work blocks: Question ”Change?”
<
Work blocks to be changed:
■ TURN PLUS marks the machining range and
makes all IWG functions available
■ Correct/optimize the machining block
6.12 Int
er
activ
e
W
o
rking Plan Gener
ation (IWG)
6.12.1 Tool call
”Tool – ...” drop-down menu
■ Manually through turret assignment: Select a
tool positioned on the turret
■ Manually through tool type/ID number: Select
the tool from the database and position it on the
turret
■ From last machining process: Select the tool
used for the last machining operation.
■ Automatic: The IWG selects and places the tool in
the revolver. - Precondition: Definition of the
machining range.