HEIDENHAIN CNC Pilot 4290 - Manual (Page 432)

10 Transfer 420
Parameter-conversion soft keys
Convert individual parameters/operating resource data
Convert parameters/operating resources
”Activate” marked files
Call the organization functions – see ” 10.4 File
Organization”
1
0
.4 P
a
ra
met
ers and Oper
ating Resour
ces
Continued
To parameter and operating resource files can be
transmitted by serial interface (7-bit transfer), some special
characters are replaced in the comments by ”_”.
10.4 Parameters and Operating
Resources
10.4.1 Converting Parameters and
Operating Resources
Call: Menu item ”Parameter conv.(ersion) – Save /
Load”
Back to Transfer menu
The CNC PILOT saves parameters and operating
resource data in internal formats and in special
directories in CNC PILOT. Before transmission the
data are converted to ASCII format and transferred to
the PARA_USR directory.
Inversely, received parameters and operating
resource files are saved in the PARA_USR directory.
In a further step, you ”activate” these files. This
means that the data are converted to internal format
and transferred to special directories in the CNC
PILOT. After this step, the CNC PILOT works with the
parameter and operating resource data received.
During conversion of parameters/operating resources
you define the name of the backup file and influence
its output as follows (in the ”Save parameters” dialog
box):
■ No comment: Only parameter and operating
resource data are output
■ With comment: Explanatory comments are
output along with the parameter/operating resource
data
Changing the mask (only in the right window)
The current mask setting is displayed below the menu
line.
■ Sort: Sort files by name or date
■ Mask: Only those entries are
displayed that the mask allows.
Wildcards:
*: Represents any characters at this
position.
?: Represents any one character at this
position.
The CNC PILOT automatically adds ”*”
to any entered mask.