HEIDENHAIN CNC Pilot 4290 - Manual (Page 390)

8 Operating Resources 378
Parameters in dialog box 2 G S TP
TH DIN: Type of tool holder – • –
TH heig (wh): Height of tool holder – • –
TH brea. (wb): Width of tool holder – • –
Breadth (dn): Tool width (tool tip
to shank back)
– • –
Shank d (sd): Shank diameter – • –
Design (A): Left-hand or right-hand tool • • •
Design (A) – Button tools: Left, right or
neutral tool versions in the
tool positions 1..4
• • •
Pitch: Thread pitch • – •
Available.: Physical availability • – •
Pict. no. (tool display) – • –
Cut.mat. Cutting material – – •
CSP comp.: Compensation factor for cutting
speed
– – •
FDR comp.: Compensation factor for feed rate – – •
Deep comp.: Compensation factor for cutting depth – – •
Location type • – •
G: Basic data
S: Tool depiction (simulation)
TP: TURN PLUS
See also:
■ ” 8.1.4 Multiple Tools, Tool Life Monitoring” (parameters of the third
dialog box)
■ ” 8.1.5 Notes on Tool Data”
■ ” 8.1.6 Tool Holder, Mounting Position”
■ The ”version” parameter defines whether the tool
reference point lies on the right or left side of the cutting
edge.
■ For neutral button tools, the tool reference point lies on
the left side of the cutting edge.
Example: Tool type 111
8.1 T
ool
D
atabase