HEIDENHAIN CNC Pilot 4290 - Manual (Page 427)

HEIDENHAIN CNC PILOT 4290 415
Define the ”transfer directory” without subdirectory. The
CNC PILOT adds the last stage, depending on the file type.
1
0.2 T
ransf
er
Method
Transfer directory
You enter the computer name, enabling name, and
path of the communication partner in ”transfer
directory” (”Setting - Directory” dialog box) in the
following form:
\\Computer name\Enabling name\Path
Example:
\\DATAPILOT\C\DP90V70\MASCH\MASCHINE1
You define the ”computer name” and ”enabling
name” on the PC of the communication partner. In
this example, the ”C” disk is enabled.
Whether you define the complete path or parts of the
path depends on your organization.
Settings for FTP
Log-in as ”system manager”
Define in control parameter 11 (”FTP parameter”):
■ Use FTP: 1 (=YES)
Select ”Setting – FTP” (Transfer mode)
”Setting FTP” dialog box:
■ User name, password: for login at the host
computer
■ Address/Name FTP server: Enter the server
name or IP address of the host computer
The menu item ”FTP” and ”Setting – FTP”
are selectable only if ”Use FTP = Yes” is
entered in control parameter 11.
Activate FTP:
Select ”FTP” (in Transfer mode) – With the defined
mask, the CNC PILOT displays:
■ Files of its own system
■ Files of the defined transfer directory (Files of the
communication partner)