HEIDENHAIN CNC Pilot 4290 - Manual (Page 24)

2 Basics of Operation 12
2.1 User Int
erf
ace
2.1 User Interface
2.1.1 Screen Displays
1 Operating mode line
Show the status of the operating modes.
■ The active mode of operation is shown with a
dark-gray background.
■ Programming and organization modes:
– The selected mode is shown at the right of the
symbol
– Additional information such as the selected pro-
gram, submode, etc. are shown below the
operating mode symbol.
2 Menu bar and pull-down menus
For function selection
3 Working window
Size and content depend on the operating mode.
Some programming and organization modes
overlap the machine display.
4 Machine display
Current status of the machine (tool position, the
cycle and spindle situation, active tool, etc.). The
machine display is configurable.
5 Status line
■ Simulation, TURN PLUS: display of current
settings or information on the next operating steps
■ Other operating modes: display of the last error
message
6 Calendar date and service ”traffic light”
■ Display of date and time
■ A color background signals a error or a PLC
message
■ The ”service traffic light” shows the servicing
state of the machine (see ” 9.3 Maintenance
system”)
7 Soft-key row
Shows the current meaning of the soft keys.
8 Vertical soft-key row
Shows the current meaning of the soft keys. For
more information: see the machine manual
8
1
2
3
4
6
7
5