HEIDENHAIN CNC Pilot 4290 - Manual (Page 246)

6 TURN PLUS 234
Undercut type K
Parameters
I:
Undercut depth
R: Undercut radius
W: Aperture angle
A: Approach angle (angle to linear axis) – default: 45°
Undercut type U
Parameters
K:
Undercut length (undercut width)
I: Undercut depth (radius)
R: Inside radius (in both corners of recess) – default: 0
P: Outside radius/chamfer
■ No: no chamfer/rounding
■ Chamfer: P = width of chamfer
■ Rounding: P = radius of rounding
6.5 Finished P
a
rt
Cont
our