HEIDENHAIN CNC Pilot 4290 - Manual (Page 245)

HEIDENHAIN CNC PILOT 4290 233
Undercut type F
Parameters
K:
Undercut length
I: Undercut depth (radius)
R: Undercut radius (in both corners of the undercut)
P: transverse depth
W: Approach angle (undercut angle)
A: Runout angle (transverse angle)
TURN PLUS suggests undercut parameters calculated from the
diameter (see ”
11.1.3 Undercut Parameters DIN 509 F”).
Undercut type G
TURN PLUS proposes the parameter values - but you can overwrite
them. The proposed values are based on the metric ISO thread (DIN
13) that is found from the diameter.
■ Parameter: see ” 11.1.1 Undercut Parameters DIN 76”
■ Finding the thread pitch: see ” 11.1.5 Thread Pitch”
Parameters
F:
Thread pitch
K: Undercut length (undercut width)
I: Undercut depth (radius)
R: Undercut radius (in both corners of the undercut) –
default: R=0.6*I
W: Approach angle (undercut angle)
Undercut type H
Parameters
K:
Undercut length
R: Undercut radius
W: Approach angle
6.5 Finished P
a
rt
Cont
our