Grass Valley XtenDD DD - Manual (Page 76)

5. Connection and Statup
5 - 14 Planning and Installation - Rev. 3 / 04.2005
5.3.2.2 Controller Connectors RC 2374
Item
No:
Socket / Connector
Description
Socket type
Connector type
Function
7
J17 LAN
LAN
W
J17 J18
Power
Activ
LEDs
BNC / 50-ohms Alternatly to J18
Cheapernet LAN connector for connection to
panel PC and mainframe controller or further
LAN devices.
For further information see the section ”LAN
Specifications”.
Note:
For interconnection the signals a BNC T-type
connector is included.
8
J18 LAN BNC / 50-ohms Cheapernet LAN connector for connection to
panel PC and mainframe controller or further
LAN devices.
For further information see the section ”LAN
Specifications”.
Note:
For interconnection the signals a BNC T-type
connector is included.
9
J19 a, J19 b, J20 a, J20 b
RS422
SERIAL PORT 1 ... 4
9-pin subminiature
D-connector
female
RS422/RS485 interface for connecting an ex-
ternal devices.
The software control automatically switches
over the interface to master or host (bus control/
tributary), depending on which unit driver has
been selected in the menu.
10
J21 a, J21 b
RS232 PORT 1 ... 2
9-pin subminiature
D-connector
female
RS232 interface for connecting a diagnosis
computer or other external devices.
11
J22 a
GPI/GPO
25-pin subminiature
D-connector
female
General-purpose interface connector with 6
optically-isolated (physically separated) input
channels and 6 output channels.
12
J22 b
MODEM
25-pin subminiature
D-connector
female
Modem interface for future use.
13
J23 a
WIPE SELECTION
50-pin subminiature
D-connector
female
Internal connection to Wipe panel RPW.
Cable set
14
J23 b
AUX SELECTION
50-pin subminiature
D-connector
female
Internal connection to Aux panel RPA.