Grass Valley XtenDD DD User Manual

Page 182

8. Installation External Devices

8 - 8

Planning and Installation - Rev. 3 / 04.2005

TiM/E Memo n this button delegates the AUX-CP to register

recall for the given TiM/E Memo system.

Make Memo

this button delegates the AUX-CP to Make Memo

macro recall.

Note:

This function is not available for AUX-CPs

installed at the E-Box

At least one function other than - - -, 2

or 3

must be programmed. Otherwise

the AUX-CP performs no action at all.

Since the CP-3020 Aux control panel module has only two delegation buttons,

Deleg 1 and Deleg 2 may be programmed with 2

and 3

. In this case, Deleg 3

defines the function of the AUX-CP. Deleg 4..6 can be ignored.

There are three modes:

when the AUX-CP is used for crosspoint selection of internal busses, the
sources can be assigned freely to the source selection buttons of the AUX-CP.

To do this, Assign changes the contents of the index card. See below.

using for crosspoint selection of external AUX busses

does not apply to the TiME Memo n and Make Memo functions. I.e. the left-
most source button selects register 0. Make Memo macro of Make Memo but-

ton 1 and so on.

8.1.3.3 Input Assign (internal sources)

The procedure for input assignment is very similar to the input assignment for the

control panel.

Assign