Grass Valley XtenDD DD User Manual
Page 185
8. Installation External Devices
8 - 11
Planning and Installation - Rev. 3 / 04.2005
8.1.4
OPERATION
Pressing a delegation button delegates the AUX-CP to that function. The delega-
tion button is lit to indicate that status. If possible, the source buttons show the cur-
rent status of the delegated function. In most cases, this will be the selected cross-
point on the delegated bus. If the function is TiME Memo recall or Make Memo
recall, no state is indicated because such recalls are events.
Pressing a delegation button that is programmed to be 2
nd
or 3
rd
toggles the shift
level of the source buttons.
2nd
3rd
Source buttons
CP-300
Source buttons
CP-330
Source buttons
CP-3020
off
off
1 .. 24
1 .. 48
1 .. 20 (+ 20 per CP 3021)
on
off
25 .. 48
25 .. 62
21 .. 40 (+ 20 per CP 3021)
off
on
49 .. 72
49 .. 96
41 .. 60 (+ 20 per CP 3021)
on
on
not allowed
Pressing a source button performs the function according to the delegation. I.e.,
selects the crosspoint or recalls the register or macro.
The response to a recall is a short flash of the source button.
The response to a crosspoint selection is the indication of the new crosspoint.
In menu Remote, the AUX-CPs can be enabled or disabled. In disabled state, the
AUX-CP performs no function. Local delegation is still possible.
Delegation
2
nd
, 3
rd
Source Buttons
AUX-CP Enable