Grass Valley XtenDD DD - Manual (Page 120)

6. Tally Signalling
6 - 2 Planning and Installation - Rev. 3 / 04.2005
The Tally Inputs of the Tally Boxes for Yellow Tally are NOT scanned, because Yel-
low Tally is a function of Red Tally and the switchers state (Next Transition, PST
Source etc.).
A Tally Box is installed in the menu Install Mainframe / Tally. For each box its
4-Byte MPK address must be given.
Each box will be assigned by it’s 4 byte MPK address.
The Tally Outputs of Tally System ”Overall” are calculated from the Tally Input
”Overall” and logically or-ed with the Tally result of all Application tally systems.The
Tally Input to an Application specific Tally system is only its own Tally Boxes. Tally
Inputs for M/Es or Aux buses not allocated by the application are ignored.
Interoperability of
the Tally Systems