Grass Valley XtenDD DD - Manual (Page 152)

7. Initial Installation
7 - 22 Planning and Installation - Rev. 3 / 04.2005
Pos. Function Factory adjustment
G4
G7
G8
G9
G11
G12
MP9
MP10
MP11
MP12
MP13
MP14
MP16
MP17
LED green: LCA configuration o.k.
LED yellow: -5V supply (VEE or VEE1) down
(on board DC/DC converter)
LED yellow: synchonization error display - should be off.
LED green: serial SDTV serial digital input detected.
If flashing, valid input detected but not selected.
LED green: serial HDTV serial digital input detected.
If flashing, valid input detected but not selected.
LED green: Analog reference input detected (for example
black burst).
FCTRL: Frame pulse for Controller Board
V: Vertical pulse (low: active video lines)
F: Frame pulse to video boards (low: field 1)
/BLD: Bank load, Controller sync for parameter
update (active low)
TPD: Frame signal
TPC: Vertical signal
TPB: Horizontal signal
TBA: Clock signal
Genlock internal signals: depend on TV standard
depend on signal connected to
sync on input