Grass Valley XtenDD DD - Manual (Page 43)

1364
LEFT FRONT
TOP
1386
1390
2
11
460
2 11
Keep free for cabling!
160
51.5
434
11
15
o
105
o
ISO
All measurements are [mm].
Note
Tolerance +/- 0,2
Mechanical dimensions see next page.
Note:
There are two possibilities of mounting Display Module RPV35-2.
3. Mounting the display module with the mounting frame outside the switcher
into the control desk or wall. See section 4.3.1 Single Module Mounting.
4. Stand-alone display with rigid stand.
The stand has to be mounted on the control panel in the place provided for this
purpose, between Aux and Wipe panel.
For mounting the stand, see the mounting drawing on the next page.
The associated mounting material will be delivered with the stand-alone display.
4. Installing Control Panels
4 - 5 Planning and Installation - Rev. 3 / 04.2005
4.2.2 RPS35-2 CONTROL PANEL