Grass Valley CR Series v.3.2 - Manual (Page 76)

64
Installation
Setting Up Your Configuration PC
4 Select ‘Use the following IP address’ and enter the IP address for your PC. Use the default
subnet mask.
The IP address must be on the same subnet as (one of ) your compact router network(s). We
recommend that you choose an IP subnet address that is not in the range 100–115 or 50–65.
Those ranges are used as defaults.
5 Click OK to finish.
Multiple Subnets
If you have multiple subnets in your compact router system, you will probably have to add those
subnets to your PC’s network configuration. Doing this is especially important for CQX routers.
Follow these guidelines:
1 Starting from step 4 in the preceding procedure, click the ‘Advanced’ button: