Grass Valley CR Series v.3.2 - Manual (Page 66)

54
Installation
Creating a Router Network
Step 2 asks you to designate a folder in which to install the software:
Click ‘Next’. Step through the remaining screens, clicking next to proceed. When the installation
has completed, the installer displays a completion message:
Click ‘Finish’ to exit from the installer and return to the ‘CR Series’ window of the CD window.
The installer creates a desktop icon and a Start menu entry. The default location for the applica-
tion is:
C:\Program Files\NVision\Compact Router System Configurator\CrConfigura-
tor.jar
The Start menu entry is:
Start > Programs > NVision > Compact Router System Configurator
Finally, launch CRSC to verify that it executes. You must create a router network before you can
put CRSC to use. Your configuration PC must be on that network. The next section,
Creating a
Router Network , tells you how to set up the network.
Creating a Router Network
There are two main reasons to create a router network:
• To perform multi-level operations (takes and locks).
• To operate individual routers or network of routers remotely (e.g., from a separate room).