Grass Valley CR Series v.3.2 - Manual (Page 144)

132
Technical Details
Audio Specifications
CR Series Analog Video Specifications
Audio Specifications
CR Series Digital Audio (AES) Specifications
Specification Detail
Signal inputs (NTSC, PAL) Input level: 1V p-p nominal.
Input range: ± 2 V.
Input return loss: < –45 dB, DC to 6 MHz.
Input CMRR: > 60 dB at 120 Hz.
Signal outputs (NTSC, PAL) Output level: 1V p-p nominal.
Output offset: DC offset 0 V ± 30 mV, relative to back porch.
Output return loss: < –45 dB, DC to 6 MHz.
Output-to-output isolation: > 90 dB at subcarrier frequency.
Signal specifications Insertion loss: 0 dB ± 0.1 dB.
Frequency response: 0 dBr ± 0.05 dBr, DC to 6 MHz.
Crosstalk: < –65 dB, at subcarrier frequency.
Noise spectrum: < –60 dB (test signal: luminance ramp.
Differential gain: < 0.1% at subcarrier frequency.
Differential phase: < 0.1° at subcarrier frequency.
Delay scatter: < ±0.65° at subcarrier, any input to any output.
Tilt: < 0.1%.
DC coupled system.
Video reference Input level range: 500 mV p-p to 2 V p-p.
Input return loss: > –40 dB, DC to 6 MHz.
Specification Detail
Signal inputs Signal type: AES3id (2 “mono” channels per input).
Sample rate: 32 kHz – 192 kHz.
Input level: 1V p-p nominal into 75 W.
Input range: 200 mV p-p to 3 V p-p into 75 W.
Input return loss: < –25 dB, from 100 kHz to 6 MHz.
Input connectors: BNC, 75 W.
Signal outputs Signal type: AES3id (2 “mono” channels per input).
Sample rate: async, 32 kHz – 192 kHz; sync, 48 kHz.
Output level: 1V p-p ± 10% into 75 W.
Output offset: 0.0 VDC ± 50 mVDC, AC coupled.
Output rise/fall time: 4 ns – 8 ns.
Output jitter: < 1ns, in synchronous mode.
Output return loss: < –25 dB, from 100 kHz to 6 MHz.
Output-to-output isolation: > 40 dB, from 100 kHz to 6 MHz.
Output connectors: BNC, 75 W.