Grass Valley CR Series v.3.2 - Manual (Page 56)

44
Introduction
Features
Remote Panel Modules
The remote panel modules have the following features and characteristics:
• Two power connections for redundancy. The remote panel modules have 2 indicator LEDs,
one for each power supply.
• One RS-422 port.
• One Ethernet port, supporting network operation.
• One copper grounding terminal.
• One 16-position rotary switch used for network installations. (This switch is hidden if a con-
trol panel is mounted on the router.)
See Creating a Router Network , on page 54, for information regarding connections in a com-
pact router network. See Network Connection , on page 179, for information regarding con-
nections under an NV9000 router control system.
• A control panel mounts easily and quickly on the remote panel module with two knurled
screws and a 40- or 60-pin connector.
• Non-volatile memory.
1RU Remote Panel Module
The RP16 remote panel module — coupled with a 1RU panel — can be used to control a network
of mixed compact routers. Figures 2-74 through 2-76 show its features:
Fig. 2-74: Front View, RP16
Fig. 2-75: Rear View, RP16
Fig. 2-76: Top View, RP16
Cover Plate over
Control Panel Connector
Mounting Slots (4)
Power Supply
LEDs
16-position
Rotary Switch
Screw Holes (2) for
Optional Control Panel
1
ON
2 3 4 5 6 7 8
DIP
PS1
DC
+12V
CTRL
ETHERNET
PS2
IN
E146905
9K50 CONFIG
GND Terminal Ethernet connector
Serial connector
PS1,
power connector
PS2, power
connector
(unused)
GND
Ethernet
Serial port
Power connectors (PS1, PS2)