Grass Valley CR Series v.3.2 - Manual (Page 44)

32
Introduction
Features
The router frame has also two power supply connectors and a ground lug. Figure 2-51 shows a
rear view of a CR6400 digital router.
Fig. 2-51: Rear View, CR6400 Router (CR6464-3Gig Shown)
 Caution: unless otherwise instructed by a Grass Valley technician, do not remove the control
card or crosspoint card from the router frame.
Other 2RU Routers
Figures 2-52 through 2-59 show the 2RU router features.
Fig. 2-52: Front View, 2RU Router
Control Card
Ethernet RS-422
64 Outputs, DIN 1.0/2.3 (coax)
PS1, PS2
GND Lug 64 Inputs, DIN 1.0/2.3 (coax)
Crosspoint Card
I/O Cards (4, 3Gig) Video Reference,
(2, BNC 75
W)
Cover Plate over Control Panel
Connector
Mounting Slots (6)
Power Supply
LEDs
16-position
Rotary Switch
Screw Holes (2) for Optional
Control Panel