Grass Valley 1200 Operation Manual - Manual (Page 70)

3-24
Section 3 — Controls & Menus
Borderline
The Borderline ® option adds border, drop shadow, extrusion, or
outline edge effects to keys (Figure 3-11). This option can be
added separately to each keyer. Control for all of the Borderline
options is provided by one set of buttons that delegate with the
Keyer panel:
■ Four border types are available (see below). Only one border
type can be selected at a time.
■ To change height or width of an edge effect, hold down one of
the four border mode buttons and use the (POSITIONER), which
delegates automatically.
■ To change the color or opacity of an edge effect, adjust the
MATTE
controls, which delegate automatically.
Normal
The [NORMAL] button selects a key with no edge effect.
Border
When you select [BORDER], a matte edge is placed all around the
key. Width of the edge is 1–3 lines.
Shadow
When you select [SHADOW], a matte edge appears below and right
or left of the key. Height is 1–6 lines and width is 1–60 lines.
Extrude
When you select [EXTRUDE], a matte edge appears that looks like a
layered drop shadow, creating a block letter effect. Height of the
edge is 1-6 lines and width is 1–60 lines.