Grass Valley 1200 Operation Manual - Manual (Page 30)

2-12
Section 2— Startup
System Setup: Using the Configuration Menus
The following procedures allow you to configure the 1200 system
to your installation. Using the Configuration menus in the menu
display, you can assign sources to the crosspoints, configure the
inputs, set output levels, adjust system timing, and set other
system parameters. These menu items are accessed through the
Configuration menu (Figure 2-5) on the Menu Display subpanel.
Figure 2-5. 1200 Configuration Menu Tree
Menu Pushbuttons and Knobs
The display panel includes pushbuttons and knobs that work
interactively with the display menus to control the switcher:
■ The white menu “hot buttons” at the left of the display
activate the top level menus.
■ The black buttons and knobs surrounding the display are
“soft” buttons and knobs that change function with each
menu. Labels displayed along the bottom and right edges of
each menu indicate the functions of the soft controls. The “>”
display symbol indicates a lower level menu that you can
view when you press the associated soft button.
■ Double-pressing one of the soft buttons next to the soft knobs
restores the associated knob function to its default value.
■ The [Exit] button takes you up one menu level.
CONFG
System Params
Define Inputs
Crosspoints
Outputs
Timing
Ports
GPI
Tally
4:3/16:9, Edit Field Dom, System Clock
Define Inputs, Select CK Source, Xpt Legends
Configure Outputs
Switcher Timing Adjustment
Serial Port Configuration
GPI Setup
Tally Relay Output Monitoring and Testing
Map Inputs to Crosspoints