Grass Valley 1200 Operation Manual - Manual (Page 120)

3-74
Section 3 — Controls & Menus
Tally Menu
The Tally menu (Figure 3-36) is displayed when you press the
[Config] top menu button followed by the [TALLY>] soft button.
The Tally menu displays a table listing the 16 physical signal
inputs, indicating those that are high-tallied by highlighting them.
Tally Menu Functions:
AUX TALLY BACK ON/OFF— (Aux Bus Tally Back) selection. Allows
use of a GPI input to tally Aux Bus 1 whenever the effects send fill
crosspoint is tallied and Aux Bus 2 whenever the effects send
source crosspoint is tallied. This provides tally back from an
external DPM. This feature must be enabled in the Tally menu and
assigned as an event to a GPI input in the GPI Inputs menu.
[TALLY TEST] —When ON, this function cycles each output on for
about 1/2 second. When finished testing, set the [TALLY TEST]
button to OFF.