Grass Valley 1200 Operation Manual - Manual (Page 57)

3-11
Effects Send
Effects Send
The Effects Send panel section includes three buttons to enable the
Effects Send option for any one of the three keyers: [KEY 1], [KEY 2],
or [DSK]. See Figure 3-5.
When you select an Effects Send keyer button, Effects Send mode
turns on for the selected keyer, the Keyer controls delegate to the
selected keyer, and the Aux buses delegate to Effects Send. Only
one keyer can use Effects Send mode at a time. This mode routes
the key and fill video outputs of the keyer outside the switcher to
a digital picture manipulator (DPM), which transforms them and
returns them to the switcher’s mixer via the aux buses.
■ To cancel Effects Send, press either of the Bus Delegates
buttons, [AUX 1] or [AUX 2]. This turns off Effects Send and
delegates the Aux row to the selected Aux bus.
Figure 3-5. Effects Send Panel Section
Key
1 Key
2 DSK
Effects Send