Grass Valley 1200 Operation Manual - Manual (Page 37)

2-19
System Setup: Using the Configuration Menus
Crosspoint Display Legends Menu
Display the Crosspoint Display Legends menu (Figure 2-10) by
selecting
[XPT DISP LEGENDS>] from the Define Inputs menu.
This menu allows you to assign an unique name (up to 4
characters) to each physical input. The name will display above
the crosspoint column to which that physical input is mapped.
1. Use the (PHYSICAL INPUT) soft knob to select a Physical
Input. The Signal Name column displays the descriptive
name of the selected Physical Input. (Signal Name is created
in the Define Inputs menu.)
2. To enter a new Local Name, select Local using the [LEGEND
MODE] soft button, press the [CLEAR LOCAL] soft button,
type a descriptive name using the keyboard, and press the
[ENTER LOCAL] soft button.
Figure 2-10. Crosspoint Display Legends Menu
CROSSPOINT DISPLAY LEGENDS MENU
ENTER
LOCAL
PHYSICAL INPUT
= J5
Exit
PHYSICAL
INPUT SIGNAL NAME
J1 VTR 1
J2
VTR 2
J3
R-VTR
J4
CHAR GEN VIDEO
J5
CHAR GEN KEY
J6
J7
DPM-700 VIDEO
DPM-700 KEY
J8
CLEAR
LOCAL
VTR 3
LOCAL
NAME
VTR1
CGV
CGK
VTR2
VTR3
RVTR
DPMK
DPMV